1. GALVANISED STEEL SIDES

Ventilation is designed into every ramp to allow for adequate air flow.

All our ramps are fully enclosed to prevent trash collection and unwanted access. Quite simply, the toughest finishing standard available.
2. SAFETY RAILS

Heavy duty, hot galvanised steel safety rails, built to last for ever.

Vertical solid bars contain flying skateboards and (unlike horizontal pickets) they are very difficult to climb.


3. TOEPLATES

Hot galvanised steel toeplates. The smoothest on the market. Our approach angles are smaller than any competitor.
4. COPING

Hot galvanised 3 mm thick steel tube to grind on. The surface behind this coping is protected with a steel grindplate, BMX pegs can not damage the surface.


5. STAINLESS STEEL EDGE PROTECTIONS

All inclined outside edges are protected by rounded (5 mm (1/4”)) stainless steel profiles mounted flush with the skate surface.
Offered exclusively by RHINO, this unique edge protection not only protects the surface edges, but also minimizes the effect of an impact on the skaters.



6. TRANSITION PROTECTION

All the transitions of our ramps are protected with a galvanised steel transition plate, mounted flush with the surface. With no gaps or sharp edges, our transitions skate smoother and safer than our competitors.
7. ALUMINIUM PROFILES

Used for non-skateable edges, they give the ramps a quality finish.

8. SEAM PROTECTIONS

All vertical seams in the riding surface are covered with a hot galvanised steel seam protection, mounted flush with the surface. This unique solution creates a smoother riding surface and protects the inside edges of the surface.



 
9. ALUMINIUM GROUND CONTACT STRIPS

The side panels are supported by 6 mm (1/4”) aluminium strips to allow a good ventilation together with the ventilation holes in the side and back panels.
10. Rhinotop ®

The quality of this specially developed riding surface is second to none. It’s the dream of every skater combined with a durability comparable to steel.
This surface has a perfect grip on the skate wheels, it’s very impact and gouge resistant, it’s fire resistant, absorbs no water and it doesn’t burn your skin when you slide on the ramps. This surface, together with our unique subconstruction, gives the ramps the professional feeling the skaters are looking for.

Dowload Rhino-Top PDF document
11. ZINC-NICKEL TAMPER RESISTANT SCREWS

All the screws have a specially designed, double asymetric thread. These screws hold 40 % better than normal screws and won’t come loose under mechanical pressure.

These screws are treated with zinc and nickel and are much stronger than stainless steel screws yet still pass a 4000 hour salt test without rusting. Anti-vandalism heads prevent disassembling.

These screws can hold up to 500 kg.  of pulling force (see testresults under ‘Safety, noise testing)

Dowload ASSY PDF document



12. GRINDRAILS

We have kinked, straight, rectangular and round grindrails in a number of
different configurations.
The ends of all of our grindrails are curved down to minimize the effect of
an impact.